The R-Car E1 is a new member of the R-Car series of automotive systems-on-chip (SoCs) offering low power consumption and high system integration targeting the cost-sensitive market of car navigation and multimedia systems including high end car radios.
- High quality multimedia processing at the low power of 1 W
- PowerVR SGX531 graphics engine for colorful, realistic 3D images
- Arm® Cortex®-A9 32-bit RISC CPU core (enhanced with NEON™ extension)
- Balanced selection of integrated peripherals and functions helps customers minimize board space and cost of their navigation solutions
- Dedicated power supply IC for use in a voltage regulator enables low-power consumption and quicker time to market
|Item||R-Car E1 Specifications|
|Power-supply voltage||3.3 V (IO), 1.8 (DDR2), 1.5 (DDR3), 1.1 V (core)|
|CPU cores||Arm® Cortex®-A9 (with NEON™)|
|Maximum operating frequency||533 MHz|
|Processing performance||1330 DMIPS|
|Cache memory||Instruction cache: 32 Kbytes
Operand cache: 32 Kbytes
|External memory||DDR3-SDRAM (DDR1066) or DDR2-SDRAM (DDR533)
Address space: 1 Gbyte
Maximum operating frequency: 533 MHz
Data bus width: 16 bits
|Expansion bus||Flash ROM and SRAM
Address space: 64 Mbytes × 3
Data bus width: 8 or 16 bits
|Main on-chip peripheral functions||PowerVR SGX531 graphics engine (2D/3D)
Display/screen output × 2 channels (Digital RGB × 1ch, PAL/NTSC × 1ch)
Screen1 : RGB888, WVGA (max), Dot clock : 45 MHz (max), Auto Gamma Control and Power Saving, TCON (RGB888)
Screen2 : PAL/NTSC Encoder＋DAC
Video input interface × 1 channels
VPU5HD2 (H.264/AVC, MPEG-4, VC-1)
Video image processing (color conversion, image expansion, reduction, filter processing)
Distortion compensation module (image renderer)
SD card host interfaces × 3 channels
Multimedia card interface
Serial audio/sound interfaces × 8 channels
Media local bus (MLB) interface ×1
(MediaLB Ver2.0, 512 fs (max) support)
USB 2.0 HS × 2 channels
GPS baseband processing module
IEBus™ bus interface
Ethernet MAC controller (IEEE802.3u, RMII, without PHY)
Controller area network interfaces × 2 channels
Serial communications interface (UART) × 8 channels
I2C bus interfaces × 4 channels
Serial peripheral interface (HSPI) × 3 channels
LBSC-DMAC : 3ch / SuperHyway-DMAC : 2ch / HPB-DMAC : 30ch
Timer × 9 channels
Genral AD converter (10 bits, 24 KHz sampling) × 2
Video DA convertar (10 bit DAC, R-string)
Interrupt controller (INTC)
Clock oscillator with built-in PLL
On-chip debugging function
|Clock stop mode, DDR-SDRAM power supply backup mode|
|Package||429-pin FPBGA (22mm×22mm)|
|Development Environment||ICE for Arm CPU available from different vendors.|
|Evaluation board||A user system development reference platform offering the following features is also available, enabling the user to carry out efficient system development.
(1) Includes car information system oriented peripheral circuits, providing a user system actual device verification environment.
(2) Can be used as a software development tool for application software, etc.
(3) Allows easy addition of custom user functions.
|Middleware||Wide variety of middleware such as H.264, MPEG-4 and VC-1 for video is available to realize complete system concept.|
Arm, Cortex is a registered trademark of Arm Limited. NEON is a trademark of Arm Limited.
PowerVR, SGX is a trademark or a registered trademark of Imagination Technologies Ltd. (UK).
SuperH is a registered trademark or a trademark of Renesas Electronics Corporation in Japan, the United States, and other countries.
IEBus™ is a trademark of Renesas Electronics Corporation.
Other product name and service name under release are the trademarks or registered trademarks that all belong to each owner.