RL78/F13 microcontrollers are successors to the 78K0R and R8C, and have the industry's lowest level of consumption current. Functions necessary for automotive application communications and implementing functional safety have been furthered enhanced. Due to high reliability, these automotive general-purpose low-end microcontrollers can be used not only for automotive applications but also industrial applications.

 

RL78/F13 microcontrollers are successors to the 78K0R and R8C, are available in a 20 to 80-pin, 16 to 128 KB flash memory lineup, and realize the industry's lowest level of consumption current. They have a built-in CAN module and LIN module for automotive interfaces, and in addition to the functional safety features of the RL78/F12 a RAM ECC function, PLL lock function, port output state monitoring, stack overflow detection, dedicated WDT oscillator and more have also been added. Since a more highly reliable system can be built, these microcontrollers can be used for industrial applications and of course automotive applications.

 

Key Features:

Remark : Only to show different point

ITEM RL78/F13
Part Name R5F10A6 R5F10BA R5F10AA R5F10BB R5F10AB R5F10BG R5F10AG R5F10BL R5F10AL R5F10BM R5F10AM
Pin Count 20 30 32 48 64 80
I/O Port In / Out CMOS 13 channels 23 channels 25 channels 38 channels 52 channels 68 channels
Output CMOS - 1 channel
Input Clock pin 2 channels 4 channels
Input 1 channel
Power supply pins For
internal
VDD, VSS, REGC
For I/O port - EVDD0, EVSS0
For
analog
VDD, VSS (AVREFP, AVREFM)
External Interrupt R5F10Bx - 9 channels 13 channels 14 channels
R5F10Ax (Flash over 64 KB) (No applicable products) 12 channels 13 channels
R5F10Ax (Flash up to 64 KB) 7 channels 8 channels 10 channels 13 channels
Key Return 2 channels 8 channels 6 channels 8 channels
Data Transfer Control (DTC) R5F10Bx - 36 sources 37 sources
R5F10Ax (Flash over 64 KB) (No applicable products) 36 sources
R5F10Ax (Flash up to 64 KB) 28 sources 29 sources 30 sources 36 sources
Timer Array Unit R5F10Bx 16-bit x (8 + 4) channels
R5F10Ax (Flash over 64 KB) (No applicable products) 16-bit x (8 + 4) channels
R5F10Ax (Flash up to 64 KB) 16-bit x 8 channels 16-bit x (8 + 4) channels
  Serial Interface CSI / SimpleI2C/UART R5F10Bx - 3 channels / 3 channels / 2 channels 4 channels / 4 channels / 2 channels
R5F10Ax
(Flash over 64 KB)
(No applicable products) 4 channels / 4 channels / 2 channels
R5F10Ax
(Flash up
to 64 KB)
2 channels / 2 channels / 1 channel 4 channels / 4 channels / 2 channels
Multi- masterI2C R5F10Bx - - 1 channel
R5F10Ax
(Flash over 64 KB)
(No applicable products) 1 channel
R5F10Ax (Flash up to 64 KB) - 1 channel
LIN / UART 1 channel
CAN - 1 channel for R5F10Bx products
10-bit A/D Converter (external channels) R5F10Bx - 12 channels (Note) 10 channels (Note) 15 channels (Note) 19 channels (Note) 20 channels (Note)
R5F10Ax (Flash over 64KB) (No applicable products) 15 channels (Note) 19 channels (Note) 20 channels (Note)
R5F10Ax (Flash up to 64 KB) 4 channels 10 channels 8 channels 12 channels 20 channels (Note)
10-bit A/D Converter (internal channels) 2 channels
Functional Safety Window Watch dog timer, Flash memory CRC, RAM ECC (with 1 bit error correction and 2 bit error detection), Illegal access detection, Frequency detection, Clock monitor,Stack point monitor, I/O-port output signal level detection
PCL / Buzzer - 1 channel
Sub oscillator - 32. 768 kHz
Operating temperature -40 to +105 °C (grade L) / -40 to +125 °C (grade K) / -40 to +150 °C (grade Y)

(Note) These are the are maximum achievable A/D converter channels.For the specified accuracy for each channel,

please refer to the data sheet.

Pin Count / Memory Size Lineup:

Program Flash
SRAM

128KB
8KB
                 
96KB
6KB
                 
64KB
4KB
           
48KB
3KB
           
32KB
2KB
           
16KB
1KB
                   
Pins
Package
20
LSSOP
30
LSSOP
32
HVQFN
48
LFQFP
48
HVQFN
64
LFQFP
80
LFQFP
  •  CAN
  •  LIN

 

Block Diagram:

RL78/F13 Block Diagram
Documents
To order an RL78/F13 MCU with Ta= -40°C to 150°C specification, please provide the order code and the application temperature mission profile for verification to Renesas.

Submit

CAN - Configuration, reception and transmission
CAN - General
Clock - Clock Generator Options
CRC - Hardware Functions
CSI - Clock Synchronous Single Master Control Software Using CSI Mode of Serial Array Unit
Current - Minimizing Power Consumption when Sensing Switch Inputs
Current - Standby Function
Current - Tuning Solution via E2 Emulator and CS+
Current - Tuning Solution via E2 Emulator and e2 studio
DAC - Resolution increase for dithering
DTC - High-Speed Transfer
DTC - High-Speed Transfer and Chain Transfer
DTC - Normal Transfer
EEPROM - Series Serial EEPROM Control Software
Flash - Flash Programmer Edition
Flash - Flash Protection and Security Setting Guide
Flash - Micron Technology M25P Series Serial Flash memory Control Software
Flash - Micron Technology N25Q Serial NOR Flash Memory Control Software
Flash - Renesas Flash Programmer Usage from the Command Line
Flash - Serial Flash memory Control Software
Flash - Spansion S25FLxxxS MirrorBit® Flash Non-Volatile Memory Control Software
IICA - Setup Procedures for IICA Multi-Master Communication
LIN - LIN Master Mode (RLIN3)
LIN - LIN Slave Mode (RLIN3)
LIN - LIN/UART Controller
MC - BLDC - 120 degrees conducting control of brushless DC motor with hall sensor
MC - BLDC (ADC) - Sensorless 120 degrees conducting control of brushless DC motor (A/D)
MC - BLDC (COMP) - Sensorless 120 degrees conducting control of brushless DC motor (COMP)
MC - BLDC Motor Control
MC - Sensorless vector control of permanent magnetic synchronous motor
Option Byte - Settings
PCB - PCB-Design for Improved EMC
Pin - Pin assignment of RL78/F13, F14 by model
PORT - Settings of port-related registers when using alternate functions
Porting Guide - 78K0 to RL78
Porting Guide - 78K0R/FC3 to RL78
Porting Guide - M16C/5L, 56 to RL78
Porting Guide - M16C/5M, 57 to RL78
Porting Guide - R8C to RL78
Porting Guide - R8C/3x to RL78
PWM - Filtered output to create DAC DC output
RAM - Execution in RAM
RTC - Real-Time-Clock Watch Error Correction function
Safety - Safety Function
SFR - Special Function Registers by Model
Speech - Sound Playback/Compression System (Original ADPCM Codec)
SW - C Compiler CC-RL Programming Techniques
SW - CubeSuite+ Startup Guide
SW - DSP Library - Filter
SW - FFT Library
SW - IAR Embedded Workbench for RL78 Programming Techniques
SW - IEC60730/60335 oriented Self Test additional Library
SW - Micron Technology P5Q Serial Phase Change Memory Control Software
SW - Open Source FAT File System M3S-TFAT-Tiny: Introduction Guide
SW - Random Number Generator
SW - Self Test Library of CARL78 for RL78 MCU
SW - Self Test Library of CCRL78 for RL78 MCU
SW - Software Migration Guide from Assembler to CC-RL
SW - Software Migration Guide from CA78K0R to CC-RL
SW - VDE Certified IEC60730/60335 Self Test Library
Temperature - Internal Temperature Sensor Calibration
Support

知识库

RL78产品家族的常见问题解答

查找常见问题解答,支持文章和开发提示。


FAQ

Inquiries

Contact Support

Contact our support team.


Contact Support

Forum

RenesasRulz Forum

Browse material, post questions and join moderated discussion related to Renesas products.


Discuss

Hardware Tools

Y-ASK-RL78F13

  • Target board ‘QB-R5F10BMG-TB’ which contains a RL78/F13 device with 80 pins and 128kB Flash memory
  • E1 OCD Emulator (HW – OCD and flash programmer)
  • IAR EWRL78 KickStart Edition (SW – compiler from IAR with limited feature set)
  • Quick-Start Guide (documentation with SW examples)

 User Manual

 Quick Start Guide

Buy

RTE0T00020KCE00000R

E2 emulator

On-chip debugging emulator for RH850 family and RL78 family. Also available as a flash memory programmer.

 User Manual

Buy

R0C00000FDW13R

Renesas Flash Programmer (Programming GUI)

The Renesas Flash Programmer provides usable and functional support for programming the on-chip flash memory of Renesas microcontrollers in each phase of development and mass production.

Features:

  • A simple GUI makes operations easy, even for first-time developers
  • PC-controlled programming via the E1 emulator or E2 emulator, a serial or USB connection

 User Manual

 Download

Software Tools

Flash Self Programming Library (SelfLib_RL78) (Type T01, European Release)

 User Manual

 Download

Data Flash Access Library (Type T01, European Release)

 User Manual

 Download

EEPROM Emulation Library (EEPROM_EMULATION_RL78) (Type T01, European Release)

 User Manual

 Download

您可以使用下方的筛选器来筛选样例程序和应用手册。

Action Needed

Disclaimer:

The information contained herein has been provided by a member of Renesas Partners. This information is provided on the Renesas website provided for convenience and informational purposes only. Renesas is not responsible for the contents of this page or any changes or updates to the information posted on this page. Certain links provided herein permit you to leave this site and enter non-Renesas sites. These linked sites are not under control of Renesas. Renesas is not responsible for the contents of any linked site or any changes or updates to such sites. These links are provided for convenience and informational purposes only. The inclusion of any link does not imply endorsement by Renesas of any linked site.

Renesas's Publication of information regarding third-party products or services does not constitute an endorsement regarding the suitability of such products or services or a warranty, representation or endorsement of such products or services either alone or in combination with any of Renesas's product or service.